Canada, Dominion. Canadian-Made International Alphabet "Z" Signal Flag

In nylon, consisting of six triangular-shaped panels, featuring large yellow and red panels in the top and bottom positions respectively with their points facing each other, with a black panel at the far left and the navy blue panel at the far right, each consisting of two smaller panels butting each other and joined at the seam via two rows of white threading, with additional reinforcing triangular patches sewn in place and butting the hoist sleeve, two at the top in black and yellow, two at the bottom in black and red, the flag with reinforced stitching along the edge on three sides. The 45 mm wide hoist sleeve is in thick white cotton and sewn in place on the left side, stamped in black ink with a large "Z" and the size " 4'6" X 5'6" " (four feet, six inches x five feet, six inches) beside the manufacturer's label inscribed in red embroidered lettering "SCYCO PRODUCT / MADE IN CANADA" near the top on the obverse, the hoist sleeve with a thick rope fed through it, incorporating loops at either end for placement upon brass clips on a flagpole. It measures 167.5 cm in width x 137 mm in height, exhibiting scattered holes in the red and navy blue panels, along with light soiling overall from active use. Better than fine.